Westin Nerf Bars are just like working boards in that they supply a mid-stage step between the bottom and the floorboard of the 1999 Ford Ranger extended cab when installed. The Nerf Bars also add to the overall visible appeal of the light-duty pickup. Another bonus of installing Nerf Bars is the added worth you’ll see when the time involves promote or commerce your Ranger. If in case you have an hour of free time and a primary auto-restore skill set, you may set up Westin Nerf Bars on your 1999 Ford Ranger extended cab.
1999 Ford Ranger Westin Nerf Bars Installation
1. Raise the left side of the Ranger with a flooring jack and help it on two jack stands. Place the two other jack stands beneath the left aspect of the Ranger, one simply behind the entrance tire and the other simply in front of the rear tire.
2. Carry the left Nerf Bar up onto the jack stands, with the mounting brackets going through the outboard side of the Ranger’s body rail. Align the mounting holes on the Nerf Bar with the manufacturing facility pre-drilled holes within the Ranger’s left body rail.
3. Slide the Nerf Bar mounting bolts via the mounting holes within the Nerf Bars and the Ranger’s frame. Thread the mounting nuts onto the ends of the bolts by hand. Tighten the nuts onto the bolts with a socket set.
4. Move the jack stands to the best side of the 1999 Ford Ranger and repeat the primary three steps to install the precise Westin Nerf Bar. Take away the jack stands when done.
5. Use care when setting the Nerf Bars on the jack stands so you do not mar the Nerf Bars’ end on the rough heads of the stands.
