The shocks on your Ford Ranger should be replaced in 50,000-mile intervals. Shocks help within the total high quality of the trip, and worn shocks can cause a lot of problems: poor dealing with, elevated tire put on and a tough ride. If your Ranger reveals any of those signs, you would possibly want to switch its shocks. New shocks may be bought out of your native auto components store and installed yourself with easy tools.

Ford Ranger Front Shock Replacement Instructions

1. Loosen the lug nuts from the two entrance tires with a tire iron wrench. Place a jack underneath the axle and raise the automobile sufficient to take away the entrance tires. Place jack stands under the axle at each side.
2. Take away the tires from the axle.
3. Find the mounting bolts that secure the front shocks in place. Spray these bolts with penetrating fluid and permit the fluid to lubricate the bolts for 10 minutes.
4. Take away the lower and higher bolts that safe the Shock in position with a ratchet and socket. Remove the Shock from the Ranger.
5. Place the new shock into position. Connect it to the brackets utilizing the inventory bolts. Tighten the bolts with a ratchet and socket.
6. Repeat steps three by way of 5 to exchange the opposite front shock.
7. Reinstall the tires and lower the car to the ground.

Ford Ranger Rear Shock Replacement Instructions

1. Loosen and remove the lug nuts on each tire with a tire iron wrench. Place a jack beneath the rear axle and elevate the Ranger high enough to take away the tire. Place a jack stand on all sides of the axle to help the weight of the vehicle. Take away the lug nuts and pull the tire from the vehicle.
2. Locate the mounting bolts. There’s a bolt on the top and bottom of the shock. Lubricate the bolts by spraying them with penetrating fluid.
3. Take away the bolts with a ratchet and socket. Remove the shock from the vehicle. Place the brand new shock into place and set up the inventory bolts. Tighten them with a ratchet and socket. Repeat these steps to interchange the other shock on the rear of the vehicle.
4. Reinstall the tires and lug nuts. Tighten the lug nuts with a tire iron wrench. Decrease the vehicle to the ground.